Skip to content

Blog

“File and Printer Sharing Ports Blocked” — But Are They?

A recent upgrade to System Center Operations Manager, taking it to the new 2019 release, perhaps combined with an update to the Windows Server management packs, created an interesting issue.

On the management server, an alert was triggered about the management server itself:

Resolution State: New
Alert: Server Service: File and Printer Sharing Ports Blocked
Source: SCOM (SMB)
Path: SCOM.fqdn
Last modified by: System
Last modified time: 3/13/2019 2:14:28 PM
Alert description: Either Windows Firewall is disabled or the firewall inbound rules for TCP ports 445 or 139 are disabled.

Interesting. Did the upgrade to SCOM 2019 or the management pack somehow break Windows File Sharing? And if it did, why hadn’t we noticed more significant issues than just this alert?

Well, no — it looks like this alert is actually earlier from March, but perhaps the alert has re-surfaced, post upgrade, as the monitor re-evaluated. What I was sure about, however, was that the file sharing ports were indeed open and that this alert couldn’t be correct!

Right? Right?

To the Firewall!

Investigating all the relevant firewall rules revealed that everything was in order — Windows File and Printer Sharing exceptions were allowed, as appropriate, across the board.

File and Printer Sharing rules

What is it Detecting?

So, it was time to dig a little deeper.

I was able to go to the Alert details and click on the Alert Monitor to drill down and find the details of how the monitor was coming to this apparently erroneous conclusion.

I extracted the script and tried running it manually on the server using cscript.

With a few WScript.Echo calls of mine sprinkled in, the relevant part of the VBScript that powered the monitor was as follows:

Dim rule

For Each rule in fwPolicy2.Rules
  If (rule.Protocol = NET_FW_IP_PROTOCOL_TCP) And (rule.LocalPorts = "445") Then
    WScript.Echo("Proto " + CStr(rule.Protocol) + " and port " + rule.LocalPorts + " enabled: " + CStr(rule.Enabled))
    WScript.Echo("rule.Profiles: " + CStr(rule.Profiles) + " and rule.Enabled " + CStr(rule.Enabled))

    If (Not rule.Enabled) And (rule.Profiles And fwCheckProfile )  Then

      WScript.Echo "Setting file sharing ports enabled to true"
      fwFileSharingPortsEnabled = "True"

      Exit For

    End If

  End If
Next

So, let’s go ahead and run this.

The script also checks to see if any non-hidden shares exist on the server and will only put the monitor in an unhealthy state if at least one exists.

It iterates over all the rules for port 445, decides all the rules are enabled, which would allow access to File Sharing, but then ends up with fwFileSharingPortsEnabled still being false.

This propagates to the ultimate script output of a PropertyBag with the value Disabled under PortStatus.

All the rules are enabled, but the result is that it considers the ports not open for business??

Is this Logic?

Is this Logic?

It seems to me that there is a logic error here:

If (Not rule.Enabled) And (rule.Profiles And fwCheckProfile )  Then

Only if the firewall rule is not enabled and the profile matches the current network profile, we consider the port enabled?

Remember that if the rule is not enabled, traffic would be blocked by the Windows Firewall.

It seems that this might be a simple logic error in the management pack. A comment later in the script even states:

‘ Only if regular share exists and port 139/445 are not open will portStatus be returned as “Disabled”

Am I missing something obvious?

I’d Report This…

I cannot figure out where I should report this, if I’m correct in thinking how this should be working. Should I complain on a forum? Is there a System Center Operations Manager support Short-Form “Bird” Social Media Site Before It Went Terrible profile? Product Support?

An Unorthodox Workaround

For now, disabling at least one of the rules for port 445 suppresses this alert. For example, if you don’t need or want Remote Event Log Management, you can disable the Remote Event Log Management (NP-In) rule. This script will then return Enabled and the alert will not be fired.

Any of the port 445 rules being disabled will cause the script to be happy again.


Pushing System Center Operations Manager Alerts to iOS and Android

I’m a huge fan of the Pushover Simple Notification Service for receiving critical alerts about the servers for which I am responsible. It’s beautifully simple — in short, it takes the ‘walled garden’ of Google or Apple’s push notification system and extends it, so that you can push any text notification you want through their API, and it’ll get to your phone.

In this post, I will share how I get critical alerts from a Microsoft System Center Operations Manager instance to Pushover.

» Read the rest of this post…